Notice: Undefined index: HTTP_ACCEPT_LANGUAGE in /home/fivehost/imp-frp.com/www/models/User.php on line 41
Thermal insulation anchor TERMOhard®

Thermal insulation anchor TERMOhard® saves and retains heat in your house

The best connection between laying and facing!
Thermal insulation anchor TERMOhard does not conduct heat!


Thermal insulation anchor TERMOhard is a substitute and replacement to steel anchors and lintels for insulation, laying and facing brick connection!

Does not rust

Cheaper than steel

Increases building life by 3 times

Thermal insulation anchor TERMOhard is used and applied for the building heat saving


Thermal insulation anchor TERMOhard is non-metal composite rebar based on glass fiber impregnated with polymer binding and designed for laying and facing wall brick connection. Thermal insulation anchor TERMOhard has a special quartz coating in order to improve adhesion to concrete, as this type of thermal insulation anchor is fitted chemically, in other words, on adhesive glue compound (glue for autoclaved aerated concrete is mainly used for such purposes), adhesion is extremely important in these anchors.
Thermal insulation anchor made of glass fiber are perfectly suitable for anchoring inside the insulation walls, as they do not conduct heat and do not decay with moisture and salts, what cannot be said about steel. Since composite materials do not act as cold bridges (do not conduct heat), energy costs are significantly reduced, in other words, it is much easier and cheaper to heat a buildingusing thermal insulation anchorTERMOhard!


Heat saving is thermal insulation anchor TERMOhard!

Thermal insulation anchor TERMOhard

Thermal insulation anchors are attached using an adhesive for aerated concrete or any other building glue. First of all, make a hole in the main layer of the wall, then fill it with a glue (give some time to solidify or harden) and place a thermal insulation anchor, then put a basalt or other insulation on a flexible connector, after all these actions lay the wall face layer with a concrete mixture (the ends are laid as in the picture below).

Available diameters:

- Thermal insulation anchor Ø 4 mm – 300 mm

- Thermal insulation anchor Ø 4 mm – 350 mm

- Thermal insulation anchor Ø 4 mm – 400 mm

- Thermal insulation anchor Ø 6 mm – 300 mm

- Thermal insulation anchor Ø 6 mm – 350 mm

- Thermal insulation anchor Ø 6 mm – 400 mm

- Thermal insulation anchor Ø 7 mm – 300 mm

- Thermal insulation anchor Ø 7 mm – 350 mm

- Thermal insulation anchor Ø 7 mm – 400 mm

- Thermal insulation anchor Ø 8 mm – 300 mm

- Thermal insulation anchor Ø 8 mm – 350 mm

- Thermal insulation anchor Ø 8 mm – 400 mm

Thermal insulation anchor TERMOhard is delivered together with sprockets for insulation fitting. Moreover, thermal insulation anchor TERMOhard can be manufactured upon the customer’s required length and diameter!